This sample code is a reproduction of the Sens'it Discovery's Vibration mode.
With the Vibration firmware, your Sens'it will send a Sigfox message using the Sens'it Discovery payload format every time a movement is detected.
You can also force a message sending with a double press on the button.
This firmware is compatible with the sensit.io application.
To build this firmware, use the make vibration command.
If you want to change the motion detection sensitivity, you can edit the VIBRATION_THRESHOLD and VIBRATION_COUNT defines.
- Sens'it Team
- Copyright (c) 2018 Sigfox, All Rights Reserved.